TJ Lazer-Fit Full Cage Welded. The Poison Spyder WELDED Lazer-Fit Full Cage is a complete, ready to bolt-in cage designed with hard core four-wheeling in mind. It represents a combination of maximum functionality and unmistakable Poison Spyder style. Available for most Jeep Wrangler models, the Welded Full Cage is manufactured with Poison Spyder's proprietary Lazer-Fit system and precise assembly fixtures to ensure an easy installation. And there are many options available to customize the cage to your specific needs.
- Laser notched and CNC bent for precise fit
- Laser etched part numbers and assembly guides makes assembly easy
- Made of 1-3/4 OD X .120 wall DOM tubing
- Mounting plates laser cut from 3/16 plate steel
- Requires welding
- Lazer-Fit Technology
All of our Full Cage Kits now feature Poison Spyder's exclusive Lazer-Fit system to ensure precise fit and easy installation. The Lazer-Fit system involves every aspect of the component, from 3-D CAD design to production on state-of-the-art machinery, to easy, worry-free installation. The entire assembly is fully engineered in 3-D design software, using an actual 3D model of the specific vehicle to ensure the best fit and use of space.
Plate steel components are CNEC laser cut and precision brake-formed. Tubular components are laser-cut, laser-notched and laser-etched to exact tolerances then CNC bent for a quality-assured, precise fit. The result is a kit of parts that match and fit each other perfectly, with no need for further grinding, notching, fitting or cussing. Assembly guides are laser-etched right onto the surface of the tube, precisely denoting where the perfectly notched end of one tube joins the surface of the other. May joints are actually "keyed" with laser-cut tabs in the tube ends that precisely engage into slots cut into the adjoining piece, making it nearly impossible to assemble the cage incorrectly. Components are also etched with part identification marks to take all the guesswork out of assembling your cage. Lazer-Fit cuts the assembly time in half (or more!), compared to competitors' cage kits.
All Poison Spyder tubular components are made of DOM (Drawn Over Mandrel) tubing. The DOM manufacturing process strengthens the tubing and gives it more uniform, precise dimensions that are better suited both to the high precision manufacturing methods of a Lazer-Fit cage as well as the high stress job a cage performs. DOM is stronger in tension, compression, bending, and against denting than the more popular (and more widely used by our competitors) HREW tubing.
The Lazer-Fit Full Cage Kit incorporate Poison Spyder's proprietary Lower A-Pillars. The Lower A-Pillar is engineered to provide a strong foundation for the forward section of the cage while not intruding into the dash or compromising legroom. The Lower A-Pillars and gussets, as well as all mounting plates, are CNC laser cut and precision brake-formed from high strength 3/16" plate steel for quality and fit.
Increased Head Room
The Lazer-Fit Full Cage Kit was recently re-designed to provide approximately 3/4" more head room, while still fitting under the factory hard and soft top. The design of the center stringer tubes was re-configured to provide maximum head room further forward. The rear passenger area also received increase headroom, and there's also more room for the hard top rear window wiper motor.
The B-Pillar is the most important structural member of the cage. The B-Pillar tube in the Poison Spyder Lazer-Fit Full Cage was recently re-designed to both increase its strength and provide more interior room. The B-Pillar now hugs the inside walls of the Jeep's tub and top more closely, providing more room inside the cabin. And we've included weld-in bolt sleeves and 1/2" Grade 8 bolts that tie the cage in to the OE roll bar brackets on the inside of the cage's tub, providing extra strength to both the cage and the side of the Jeep's body tub. At the top, the B-Pillar connection to the cage assembly is strengthened with laser-notched 90 degree tube gussets.
Laser Etched Drill Marks
Not only are assembly marks laser etched into the cage tubes, but we've also etched drill marks for re-installation of many OE components such as soft top door surrounds, speaker pods, soft top bow brackets and seat belts (see optional seat belt brackets below). Etching these drill locations makes it easy for those who want to re-install these components, but also leaves the tube intact and un-drilled for those who choose not to install certain components.
Optional Entry Grab Handles
Entry Grab Handles may be added to make entry and exit easier, as well as providing a secure grab handle while wheeling. Made of 1.25" X .120 wall tubing, bent and laser notched to perfectly fit Poison Spyder Lazer-Fit cages. Kit comes with both right and left handles. Installation is easy for the DIY installer, as the installation guide marks have been laser-etched right into the tubes of the cage.